Periodontal indexes of two types of 3 x 3 retainers: 0.032-in SS V-loop versus 0.0215-in SS coaxial - a randomized crossover trial.

OBJECTIVE: This randomized crossover trial evaluated periodontal indexes of two types of 3 x 3 retainers (a modified 0.032-in SS V-loop retainer and a conventional 0.0215-in SS coaxial wire retainer) after bonded for six months. Also, bonded failure rate, and a questionnaire about comfort, ease of cleaning and overall preference were recorded. MATERIAL AND METHODS: 15 patients were enrolled in this study who used both retainers for six months each, having a 15-day wash-out interval between each bonded retainer usage. The following periodontal index were recorded: Plaque Index (PI), Calculus Index (CI) and Gingival Index (GI). Patients answered a questionnaire to assess comfort, ease of cleaning and overall retainer-type preference. Rate of bonding failure was also evaluated. RESULTS: V-Loop retainer showed higher PI (P<0.05) as compared to conventional 0.0215-in coaxial wire retainer. However, CI and GI presented no statistically significant differences between both types of retainers. The conventional 0.0215-in coaxial wire retainer was chosen as the most comfortable (p<0.05), although no statistically significant differences were found for all other questionnaire answers. Bonding failure events were more observed in the 3x3 V-Loop retainer (p<0.002), as compared to the conventional 0.0215-in coaxial retainer. CONCLUSION: V-Loop retainer showed higher PI (p<0.05), higher bonding failure rate and less comfortable, as compared to conventional 0.0215-in coaxial wire.

In vitro effect of two resin based materials for treating initial caries lesion around braces, under cariogenic challenge.

Background: Orthodontic treatment makes the patient susceptible to the development of white spot lesions (WSL) due to the greater accumulation of bacterial plaque. The purpose of this in-vitro study was to evaluate the preventive effect of two resin materials on the incidence of these lesions in the region adjacent to the fixed bracket bonded under a WSL-treated area by two resin materials. Material and Methods: 36 extracted human molars presenting natural WSL were included. They were randomly divided into 2 groups for intervention: IC (Infiltration resin Icon®) and PS (resin sealant Pro Seal ®). Braces were bonded just above the WSL. The enamel surface around the brace was treated by one of the tested materials, leaving another part to be control. The samples were submitted again to a cariogenic challenge. The exposed enamel non-treated area from booth groups comprised the control group (E). For morphological analysis, confocal images were taken at baseline, after treatment, and after pH cycling of each sample. Lesion depth were measured (µm) and compared to the enamel thickness to calculate a demineralization index. All groups were compared using the Kruskal Wallis test and Dunn's post-test. Results: PS group showed the lowest demineralization index (0.27 µm) when compared to the control area (0.39 µm) (p<0.05). IC presented a slightly higher percentage of lesions when compared to PS, however, did not differ significantly from the control exposed area. Conclusions: The resin sealant Pro Seal® had a positive protective effect under white spot environmental area and Icon® infiltrant, although showed some protection, did not statistically differ from controls. Key words:Dental Caries, Orthodontics, Dental Enamel, Sealants.

Periodontal indexes of two types of 3 x 3 retainers: 0.032-in SS V-loop versus 0.0215-in SS coaxial - a randomized crossover trial

ABSTRACT Objective: This randomized crossover trial evaluated periodontal indexes of two types of 3 x 3 retainers (a modified 0.032-in SS V-loop retainer and a conventional 0.0215-in SS coaxial wire retainer) after bonded for six months. Also, bonded failure rate, and a questionnaire about comfort, ease of cleaning and overall preference were recorded. Material and Methods: 15 patients were enrolled in this study who used both retainers for six months each, having a 15-day wash-out interval between each bonded retainer usage. The following periodontal index were recorded: Plaque Index (PI), Calculus Index (CI) and Gingival Index (GI). Patients answered a questionnaire to assess comfort, ease of cleaning and overall retainer-type preference. Rate of bonding failure was also evaluated. Results: V-Loop retainer showed higher PI (P<0.05) as compared to conventional 0.0215-in coaxial wire retainer. However, CI and GI presented no statistically significant differences between both types of retainers. The conventional 0.0215-in coaxial wire retainer was chosen as the most comfortable (p<0.05), although no statistically significant differences were found for all other questionnaire answers. Bonding failure events were more observed in the 3x3 V-Loop retainer (p<0.002), as compared to the conventional 0.0215-in coaxial retainer. Conclusion: V-Loop retainer showed higher PI (p<0.05), higher bonding failure rate and less comfortable, as compared to conventional 0.0215-in coaxial wire.

RESUMO Objetivo: Este estudo cruzado e randomizado avaliou os índices periodontais de dois tipos de contenções 3x3 (uma contenção aço V-Loop de 0,032" modificada e uma contenção convencional de fio coaxial aço de 0,0215") após colagem, por seis meses. Além disso, foram registradas a taxa de falha na colagem e um questionário sobre conforto, facilidade de limpeza e preferência geral. Material e Métodos: Foram incluídos nesse estudo 15 pacientes que usaram ambas as contenções por seis meses cada, com intervalo de quinze dias entre cada contenção fixa. Foram registrados os seguintes índices periodontais: Índice de Placa (IP), Índice de Cálculo (IC) e Índice Gengival (IG). Os pacientes responderam a um questionário para avaliar o conforto, a facilidade de limpeza e a preferência geral pelo tipo de contenção. A taxa de falha de colagem também foi avaliada. Resultados: A contenção V-Loop apresentou maior IP (p<0,05) em comparação ao fio coaxial convencional. Entretanto, IC e IG não apresentaram diferenças estatisticamente significativas entre as contenções testadas. A contenção convencional de fio coaxial 0,0215" foi escolhida como a mais confortável (p<0,05), embora não tenham sido encontradas diferenças estatisticamente significativas para todas as outras respostas do questionário. Eventos de falha de colagem foram mais observados na contenção V-Loop 3 x 3 (p<0,002) em comparação com a contenção coaxial convencional de 0,0215". Conclusão: A contenção V-Loop apresentou maior IP (p<0,05), maior taxa de falha de colagem e foi menos confortável em comparação ao fio coaxial convencional 0,0215".

Accuracy of three-dimensional soft tissue profile prediction in orthognathic surgery.

PURPOSE: To evaluate the accuracy of three-dimensional (3D) soft tissue prediction in bimaxillary orthognathic surgery. METHODS: Cone-beam computed tomographs of 88 patients with class II (n = 46) and class III (n = 42) malocclusions, who underwent bimaxillary orthognathic surgery, were included in this retrospective study. 3D soft tissue prediction and postoperative outcome were compared by using ten landmarks of facial soft tissues. Patients' sex and age were also assessed. Results were analyzed using a mixed model methodology (p < 0.05). RESULTS: The success criterion adopted was a mean discrepancy of < 2 mm. Most mandibular landmarks indicated a tendency for underprediction with a downward direction in class II patients, with some values > 2 mm. In class III, there was overprediction with a downward direction for the mandibular landmarks, with values < 2 mm. More accurate results were found in female and older patients. CONCLUSIONS: 3D surgical planning showed clinically acceptable results for predicting soft tissues in patients undergoing bimaxillary orthognathic surgery, with more accurate results for class III patients. Although some differences were found when age and sex were interacted, a consistent association between these variables could not be stated. These results support the clinician, as accuracy can provide a strong guide to the surgeon when planning surgical orthodontic treatment.

Associating the Presence of Structural Defects in Dental Enamel with Children's Health History / Associando a Presença de Alterações de Estrutura no Esmalte Dentário com Histórico de Saúde na Infância

The enamel defects, hypoplasia and hypo mineralization, are classified as dental anomalies of structure, being frequently found in deciduous and permanent dentitions, since the permanent teeth and second deciduous molars finish their total mineralization after the age of three. The aim of the present study was to identify the presence of hypo mineralization and/or enamel hypoplasia and to associate it with respiratory problems in infant patients. Of the 90 patients evaluated, it was found that 23 male children (57.5%) and 22 female children (44%) had defects in the structure of tooth enamel. Most children were born by cesarean operation (64.4%), with no complications during birth (90.0%), 12.2% of children had dental anomalies (agenesis, ectopic canine, ankylosis, fusion, conoid tooth, and macrodontia, only 7 children showed an association between dental anomalies and enamel defects. Regarding respiratory problems that occurred up to 3 years of age, 38.9% had an episode of asthma, bronchitis, sinusitis, rhinitis, or pneumonia, and 55% had similar results at the current age. There was a positive association (Chi-square tests) between the presence of changes in the structure of tooth enamel and the presence of respiratory problems up to 3 years of age (p <0.001). It is concluded, therefore, that the presence of respiratory problems in early childhood, can interfere in amelogenesis, providing disturbances for the formation of normal enamel, causing defects or irregularities in the surface of the dental enamel, such as hypoplasias and hypo mineralization. (AU)

Os defeitos de esmalte, hipoplasia e hipomineralização, são classificados como anomalias dentárias de estrutura, sendo encontrados com frequência nas dentições decídua e permanente, já que os dentes permanentes e segundos molares decíduos finalizam sua total mineralização após os três anos de idade. O objetivo do presente estudo foi identificar a presença de hipomineralização e/ou hipoplasia de esmalte, e associála com problemas respiratórios no paciente infantil. Dos 90 pacientes avaliados, constatou-se que 23 crianças do gênero masculino (57,5%) e 22 do gênero feminino (44%) apresentaram defeitos na estrutura do esmalte dentário. A maioria das crianças nasceu de parto cesária (64,4%), sem complicação no parto (90,0%), 12,2% das crianças apresentaram anomalias dentárias (agenesia, canino ectópico, anquilose, fusão, dente conóide e macrodontia), somente 7 crianças apresentaram associação entre anomalias dentárias e defeitos de esmalte. Em relação à problemas respiratórios ocorrido até aos 3 anos de idade 38,9% apresentaram algum episódio de asma, bronquite, sinusite, rinite ou pneumonia e 55% apresentaram resultados semelhantes na idade atual. Houve associação positiva (Testes Qui Quadrado) entre a presença de alterações na estrutura do esmalte dentário e presença de problemas respiratórios até os 3 anos de idade (p<0,001). Conclui-se, portanto, que a presença de problemas respiratórios na primeira infância, podem interferir na amelogênese, proporcionando distúrbios para formação do esmalte normal, causando defeitos ou irregularidades na superfície do esmalte dentário, como hipoplasias e hipomineralizações. (AU)

Impact of orthognathic surgery on the prevalence of dehiscence in Class II and Class III surgical-orthodontic patients.

OBJECTIVES: The objectives were to evaluate and compare the presence of bone dehiscence before and after orthognathic surgery. MATERIALS AND METHODS: In this retrospective study, 90 cone-beam computed tomography (CBCT) scans from 45 patients were evaluated. Class II (n = 23) and Class III (n = 22) orthodontic patients who were being prepared for orthognathic surgery were measured. CBCT scans were obtained about 30 days prior to (T0) and 6 months after (T1) double jaw orthognathic surgery. The distance between the cemento-enamel junction (CEJ) and the alveolar bone crest was assessed at the buccal and lingual surfaces of all teeth, on both sides and arches, except for the second premolars and the second and third molars. A total of 1332 sites were measured for Class II (644) and Class III (688) patients. The software used was OsiriX (version 3.3 32-bit). Data were compared with Wilcoxon and McNemar tests at the 5% level. RESULTS: Bone dehiscence before surgery was present in 26% and 15% of the Class II and III groups, respectively. The presence of dehiscence increased to 31% in the Class II and 20% in the Class III patients after surgery (P < .05). CONCLUSIONS: The prevalence of dehiscence increased slightly in Class II and Class III surgical-orthodontic patients after orthognathic surgery. Temporary vascular supply reduction and oral hygiene difficulties may explain these results; however, more studies are needed.

Bone dehiscence formation during orthodontic tooth movement through atrophic alveolar ridges.

OBJECTIVES: To test the null hypothesis that there is no difference in bone dehiscence formation before and after orthodontic tooth movement through an atrophic alveolar ridge. MATERIAL AND METHODS: This longitudinal retrospective study evaluated pretreatment and posttreatment cone-beam computed tomography imaging of 15 adult patients. Twenty-five teeth were moved through the atrophic alveolar bone, whereas 25 teeth not subjected to translational movement were considered controls. The distances between the cementoenamel junction and the alveolar bone crest were assessed at the mesial, distal, buccal, and lingual surfaces of all of these teeth. Data were compared using the Wilcoxon test. The Spearman correlation test and multivariate linear regression analysis were also performed. RESULTS: In general, crestal bone height was reduced around 0.5 mm in all groups in every direction. Median buccal dehiscence increased significantly (+2.25 mm) (P < .05) in teeth moved through the atrophic ridge. Control teeth also had buccal crest loss (+0.83 mm), but this was not statistically different from that of the experimental teeth. Lingual dehiscence increased significantly for the experimental (+0.17 mm) and control (+0.65 mm) groups. Mesial bone height decreased more in the control group (-0.44mm) than in the experimental group (-0.14mm). There was moderate correlation between amount of tooth movement and alveolar bone loss. CONCLUSIONS: The null hypothesis was rejected as dehiscence increased after tooth movement through an atrophic alveolar ridge, mainly in the buccal plate.

How does bimaxillary orthognathic surgery change dimensions of maxillary sinuses and pharyngeal airway space?

OBJECTIVES: To assess changes in the maxillary sinus (MS) and pharyngeal airway space (PAS) after bimaxillary orthognathic surgery using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: The CBCT scans of 48 patients were divided into two groups: group 1: maxillary advancement and mandibular setback (n = 24); group 2: maxillomandibular advancement (n = 24). The CBCTs were acquired 1 to 2 months preoperatively and 6 to 8 months postoperatively. A kappa test was used to determine intra- and interexaminer agreement. Area, volume, and linear measurements of MSs and PASs obtained before and after surgery were compared using a mixed model (P < .05). RESULTS: All variables of the MS showed significant postsurgical reductions in both groups, except the MS length, which showed a significant increase in group 2. Volume and minimum axial area of PAS showed statistically significant postsurgical increases in both groups (P < .05). CONCLUSIONS: Despite the reduction in the MS and the increase in the PAS, results indicated that the airway was not negatively affected after maxillomandibular advancement and maxillary advancement with mandibular setback.

Lateral and apical root resorption in teeth orthodontically moved into edentulous ridge areas.

OBJECTIVE: The present study aimed at comparing the external lateral root resorption (ELRR) and external apical root resorption (EARR) between teeth moved through the atrophic edentulous ridge and those undergoing the usual orthodontic movement. METHODS: Fifty-four premolars were evaluated, where 27 of them had been moved toward the edentulous ridge (Group 1) and 27 from the same patient, had not been translated, which comprised the control group (Group 2). ELRR was evaluated by 0-3 scores and EARR was evaluated by 0-4 scores, before and after movement. Measurements were compared by Kruskal-Wallis and Student-Newman-Keuls tests. RESULTS: ELRR increased statistically only in the Group 1 (p< 0.05). After orthodontic treatment, it was observed that almost 56% (n = 15) of teeth in Group 1 presented scores 2 and 3, while Group 2 presented scores 2 and 3 in about 11% (n= 3) of the teeth. EARR increased in both groups after orthodontic movement, however, statistically analyses showed no significant differences between groups (p> 0.05). CONCLUSIONS: Orthodontic movement into the atrophic edentulous ridge is subject to a greater lateral external root resorption.

Lateral and apical root resorption in teeth orthodontically moved into edentulous ridge areas

ABSTRACT Objective: The present study aimed at comparing the external lateral root resorption (ELRR) and external apical root resorption (EARR) between teeth moved through the atrophic edentulous ridge and those undergoing the usual orthodontic movement. Methods: Fifty-four premolars were evaluated, where 27 of them had been moved toward the edentulous ridge (Group 1) and 27 from the same patient, had not been translated, which comprised the control group (Group 2). ELRR was evaluated by 0-3 scores and EARR was evaluated by 0-4 scores, before and after movement. Measurements were compared by Kruskal-Wallis and Student-Newman-Keuls tests. Results: ELRR increased statistically only in the Group 1 (p< 0.05). After orthodontic treatment, it was observed that almost 56% (n = 15) of teeth in Group 1 presented scores 2 and 3, while Group 2 presented scores 2 and 3 in about 11% (n= 3) of the teeth. EARR increased in both groups after orthodontic movement, however, statistically analyses showed no significant differences between groups (p> 0.05). Conclusions: Orthodontic movement into the atrophic edentulous ridge is subject to a greater lateral external root resorption.

RESUMO Objetivo: O presente estudo teve como objetivo comparar a reabsorção radicular lateral externa (RRLE) e a reabsorção radicular apical externa (RRAE) em dentes movimentados sobre o rebordo edêntulo atrófico e naqueles submetidos à movimentação ortodôntica usual. Métodos: Foram avaliados 54 pré-molares, sendo 27 deles movimentados em direção ao rebordo edêntulo (Grupo 1) e 27 (dos mesmos pacientes) não transladados, que compuseram o grupo controle (Grupo 2). A RRLE foi avaliada por meio de escores de 0 a 3, e a RRAE foi avaliada por meio de escores de 0 a 4, antes e depois do tratamento. As medidas foram comparadas por meio dos testes de Kruskal-Wallis e de Student-Newman-Keuls. Resultados: O escore da RRLE aumentou estatisticamente apenas no Grupo 1 (p< 0,05). Após o tratamento ortodôntico, observou-se que quase 56% (n = 15) dos dentes do Grupo 1 apresentaram escores 2 e 3, enquanto o Grupo 2 apresentou escores 2 e 3 em cerca de 11% (n = 3) dos dentes. O escore da RRAE aumentou em ambos os grupos após a movimentação ortodôntica; entretanto, as análises estatísticas não mostraram diferenças significativas entre os grupos (p> 0,05). Conclusões: Dentes submetidos à movimentação ortodôntica sobre rebordo edêntulo atrófico estão sujeitos a uma maior reabsorção radicular externa lateral.

DSC analysis and evaluation of forces released on deactivation of 0.40-mm (0.016") orthodontic thermo-activated NiTi wires: An in vitro study.

Background. This study evaluated the phase transformation of NiTi orthodontic wires and forces they release on deactivation. Methods. The structural phase transformations of the following five thermo-activated nickel-titanium (NiTi) wires were evaluated using differential scanning calorimetry (DSC): Flexy Thermal Sentalloy® (GAC International), NiTi (35ºC) (Eurodonto), Thermo-Plus® (Morelli), FlexyNiTi® Flexy Thermal (35ºC) (Orthometric) and Damon® CuNiTi (35ºC) (ORMCO Corp.). The wires had a cross-section of 0.40 mm (0.016"). In addition, the forces they released were investigated using the three-point bending test. Five arches of each wire were tested using DSC (-20/80ºC at 10ºC/min), and six arches from each wire were sectioned for bending tests. The data were analyzed with ANOVA and post hoc Tukey tests. Pearson's correlation test was performed between the results yielded by the DSC tests and those by three-point analyses (P=0.05). Results. The DSC analysis showed differences between the NiTi alloys from all the manufacturers, with no differences between the lots of the same brand. ORMCO and Orthometric wires exhibited similar TTR values in cooling (P=0.49), and statistically similar TTR values in heating (P=0.056). The three-point bending test showed different patterns in releasing forces. A correlation was found between the DSC analysis and the three-point bending test results. Conclusion. The higher the temperature transformation was, the larger was the variation of force. All the wires presented higher forces at 3-mm deflection from 155 (±12.3) to 168.1 (±8) cN. The DSC analysis and the three-point bending test showed differences between the NiTi alloys from all the manufacturers.

Efficacy of fluoride associated with nano-hydroxyapatite in reducing enamel demineralization adjacent to orthodontic brackets: in situ study

ABSTRACT Objective: To assess in situ the effect of fluoride associated with nano-hydroxyapatite for the prevention of demineralization of the enamel adjacent to orthodontic brackets. Material and Methods: Eight volunteers wore palatal devices prepared with 6 bovine enamel blocks (5x5x2 mm) with bonded brackets. The volunteers used the devices in two different moments of 14 days each. During the first 14 days, a product containing fluoride + nano-hydroxyapatite was applied twice (experimental group, GNH, n = 48), and for the other 14 days no prevention product was applied (control group, CG, n = 48). In both groups, along the experiment, the blocks were dripped with 20% sucrose eight times daily. After the experiment, all the specimens were sectioned and examined for lesion depth analysis (µm) under polarized light microscopy, and for enamel longitudinal microhardness (measured under the bracket, at 30 µm and at 130 µm from the margin), at seven different depths (10, 20, 30, 50, 70, 90, and 110 µm). Results: Under polarized light, group GNH presented significantly less demineralization depth ( X ¯= 15.01 µm, SD = 33.65) in relation to CG ( X ¯= 76.43 µm, SD = 83.75). Enamel longitudinal microhardness demonstrated significantly higher microhardness for group GNH when compared to CG. Conclusion: Fluoride + nano-hydroxyapatite can be an alternative preventive procedure for demineralization of the enamel adjacent to orthodontic brackets.

RESUMO Objetivo: avaliar in situ o efeito da nano-hidroxiapatita associada ao fluoreto na prevenção da desmineralização do esmalte adjacente aos braquetes ortodônticos. Material e Métodos: oito voluntários utilizaram aparelhos palatinos preparados com seis blocos de esmalte bovino (5 x 5 x 2 mm) com braquetes colados unidos por um fio de NiTi 0,016" preso por ligaduras elásticas. Os voluntários utilizaram os dispositivos em dois tempos distintos de 14 dias. Durante os primeiros 14 dias, um produto contendo flúor + nano-hidroxiapatita foi aplicado duas vezes (grupo experimental, GNH, n = 48), e nos outros 14 dias não foi aplicado qualquer produto de prevenção (grupo controle, GC, n = 48). Em ambos os grupos, ao longo do experimento, os blocos foram gotejados com sacarose a 20%, 8 vezes ao dia. Após o experimento, todos os espécimes foram seccionados e examinados para análise de profundidade de lesão (µm), sob microscopia de luz polarizada, e para microdureza longitudinal do esmalte do braquete (a 30µm e a 130µm da margem), a 7 profundidades diferentes (10, 20, 30, 50, 70, 90 e 110µm) Resultados: sob luz polarizada, o grupo GNH apresentou significativamente menor profundidade de desmineralização ( X ¯= 15,01µm, D.P. = 33,65) em relação ao GC ( X ¯= 76,43µm, D.P. = 83,75) A microdureza longitudinal do esmalte demonstrou valor significativamente maior para o grupo GNH, quando comparado ao GC. Conclusão: a nano-hidroxiapatita associada ao fluoreto pode ser um procedimento alternativo para a prevenção da desmineralização do esmalte adjacente aos braquetes ortodônticos.

Three-dimensional alterations in pharyngeal airspace, soft palate, and hyoid bone of class II and class III patients submitted to bimaxillary orthognathic surgery: A retrospective study.

INTRODUCTION: The aim of this retrospective study was to evaluate changes in pharyngeal airway space (PAS), soft palate, and hyoid bone position after bimaxillary orthognathic surgery in skeletal Class II and Class III patients. METHODS: Patients were divided into Group 1: Class III patients who underwent maxillary osteotomies and mandibular setback surgery (N = 43); and Group 2: Class II patients who underwent maxillomandibular advancement surgery (N = 36). Cone beam computed tomography (CBCT) images were acquired one month before and six to eight months after orthognathic surgery. PAS area, volume and minimum axial area (MAA), soft-palate morphology, and hyoid bone position measurements obtained before and after orthognathic surgery were compared using the Gamma family test (p ≤ 0.10). RESULTS: In Class II group the maxillomandibular advancement surgery significantly increased the PAS area, volume, and MAA and significantly affected hyoid bone position and soft-palate morphology. In Class III group, maxillary osteotomies and mandibular setback also showed increase in PAS area, however without statistically significant values for most of the evaluated measurements. CONCLUSION: The results of the present study indicate that PAS and related structures are expected to be improved in Class II patients submitted to bimaxillary surgery, and they are not negatively affected by bimaxillary surgery in Class III patients.

Efficacy of fluoride associated with nano-hydroxyapatite in reducing enamel demineralization adjacent to orthodontic brackets: in situ study.

OBJECTIVE: To assess in situ the effect of fluoride associated with nano-hydroxyapatite for the prevention of demineralization of the enamel adjacent to orthodontic brackets. MATERIAL AND METHODS: Eight volunteers wore palatal devices prepared with 6 bovine enamel blocks (5x5x2 mm) with bonded brackets. The volunteers used the devices in two different moments of 14 days each. During the first 14 days, a product containing fluoride + nano-hydroxyapatite was applied twice (experimental group, GNH, n = 48), and for the other 14 days no prevention product was applied (control group, CG, n = 48). In both groups, along the experiment, the blocks were dripped with 20% sucrose eight times daily. After the experiment, all the specimens were sectioned and examined for lesion depth analysis (µm) under polarized light microscopy, and for enamel longitudinal microhardness (measured under the bracket, at 30 µm and at 130 µm from the margin), at seven different depths (10, 20, 30, 50, 70, 90, and 110 µm). RESULTS: Under polarized light, group GNH presented significantly less demineralization depth ( X ¯ = 15.01 µm, SD = 33.65) in relation to CG ( X ¯ = 76.43 µm, SD = 83.75). Enamel longitudinal microhardness demonstrated significantly higher microhardness for group GNH when compared to CG. CONCLUSION: Fluoride + nano-hydroxyapatite can be an alternative preventive procedure for demineralization of the enamel adjacent to orthodontic brackets.

Three-dimensional analysis of the pharyngeal airway space and hyoid bone position after orthognathic surgery.

PURPOSE: The aim of this study was to evaluate changes in the pharyngeal airway space (PAS) and hyoid bone position after orthognathic surgery with cone-beam computed tomography (CBCT). MATERIAL AND METHODS: This study was conducted with the tomographic records of 30 patients with skeletal class II or III deformities submitted to two different types of orthognathic surgery: Group 1 (n = 15), maxillary advancement, and mandibular setback; and Group 2 (n = 15), maxillomandibular advancement. CBCT scans were acquired preoperatively (T0); and at around 1.5 months (T1) and 6.7 months (T2) postoperatively. PAS volume, minimum cross-sectional area (min CSA), and hyoid bone position changes were assessed with Dolphin Imaging 3D software, and results analyzed with ANOVA and a Tukey-Kramer test (p < 0.05). RESULTS: The hyoid bone was significantly displaced in the horizontal dimension, moving posteriorly in Group 1, and anteriorly in Group 2. Although PAS volume and min CSA increased after both surgeries, these measurements were significantly larger only in Group 2. The significant differences that existed between groups preoperatively no longer existed after the surgeries. CONCLUSIONS: Both orthognathic surgeries assessed resulted in changes in hyoid bone position and increased PAS volume and min CSA, particularly after maxillomandibular advancement surgery.

Histological and morphological evaluation of condylar cartilage of young rats in response to stimulation of mandibular protrusion / Avaliação histológica e morfológica da cartilagem condilar de ratos frente a estímulos de protrusão mandibular

The aim of this study was to evaluate the histogical and morphological aspects of the condyle in response to mandibular protrusion induced by composite resin occlusal planes. Thirty five-week-old male Wistar rats were selected and randomly divided in two groups. One group received a composite resin type of oclusal plane that induced mandibular protrusion, and the other was the control group, without treatment. Animals were euthanized after experimental time intervals of 7, 21 and 30 days. For histological analysis, thickness of the proliferative, serial and hypertrophic layers was measured, as well as each layer separately. The highest difference in cartilage thickness was observed at day 21, showing a significant increase of the proliferative layer. There were also other histomorphological changes related to occlusal plane interference. Condylar forward repositioning induced by composite occlusal planes influenced the endochondral ossification, increasing the proliferative layer.

Este estudo teve como objetivo avaliar os aspectos histológicos e morfológicos do côndilo mandibular diante da protrusão induzida por um plano inclinado fixo de resina. Para tanto, trinta ratos Wistar machos com cinco semanas de vida foram divididos aleatoriamente em dois grupos. Um grupo experimental (E) recebeu o plano inclinado fixo de resina, que induziu a mandíbula à protrusão, e o outro consistiu no grupo controle (C), sem tratamento. Os animais foram eutanasiados após 7, 21 e 30 dias de experimento. Para análise histológica, foi realizada a mensuração da espessura condilar total, incluindo as camadas proliferativa, seriada e hipertrófica, assim como cada camada separadamente. A maior espessura da cartilagem foi observada em 21 dias no grupo E, com significante aumento da camada proliferativa. Também foram verificados níveis de histodiferenciação nos demais períodos, caracterizando interferência do plano inclinado. Concluiu-se que a indução do posicionamento condilar em avanço por meio do plano inclinado fixo interferiu no processo de ossificação endocondral, aumentando a atividade da camada proliferativa.

Rotation of the upper first molar in Class I, II, and III patients.

OBJECTIVE: The aim of this study was to evaluate the mean rotation of the upper first molar (U1(st) M) in cast models from nontreated patients presenting: Class I, skeletal Class II, dental Class II, and skeletal Class III, comparing with Class I orthodontically treated patients. MATERIALS AND METHODS: One hundred cast models were evaluated with five groups, composed of nontreated Class I (n = 20), dental Class II (n = 20), skeletal Class II (n = 20), skeletal Class III (n = 20), and treated Class I (n = 20). Measurements were taken from photocopies of the upper arches. The angle formed between a line crossing the mesiopalatal and the distal-buccalcusps of the U1(st) M and a line traced on mid palatal junction were measured in all samples. RESULTS: One-way variance analysis showed that dental Class II group presented great mean rotation of the 1(st) molar (x = 78.95°, SD = 6.19) (P < 0.05), and in 85% of the patients from this group this angle was higher than 73°. CONCLUSIONS: The skeletal Class II and skeletal Class III groups showed similar mean position of the 1(st) molar, presenting rotation in approximately 50% of the patients. It can be concluded that upper molar rotation occurs mainly in dental Class II patients and shows higher mesial rotation angle.

Effects of rapid maxillary expansion with six months of retention and no further orthodontic treatment / Efeitos da expansão rápida da maxila com 6 meses de contenção e sem posterior tratamento ortodôntico

Previous investigations addressing the long-term effects of rapid or slow expansion on the face and teeth involved the use of a orthodontic fixed appliance following expansion therapy. The present study evaluated changes in dentoskeletal aspects following rapid maxillary expansion (RME) and determine the stability of these changes over three years of follow up. Ten children with bilateral posterior crossbite were evaluated (experimental group). Dental casts and lateral cephalograms were evaluated prior to RME (T0) as well as three months (T1), one year (T2) and three years (T3) after RME. The measures were compared to a control group composed of 21 individuals using ANOVA and the Student's t-test (p > 0.05). Changes on the transverse plane revealed significant expansion of the upper dental arch three months after RME, stable after three years. Expansion at the cusp level was similar to that at the gingival level. No significant changes were found in the angular and linear cephalometric measures among T0, T1, T2 and T3, and in comparison to the control group (p > 0.05). We concluded that early RME produces stable transverse increases in the upper arch after three years without significantly altering sagittal and vertical dentoskeletal relationships, and neither inclined teeth.

A expansão rápida ou lenta da maxila seguida do uso de aparelhos ortodônticos fixos altera a face e os dentes. Este estudo avaliou as mudanças dentoesqueléticas após a expansão rápida da maxila (ERM) e determinou a estabilidade dessas mudanças em três anos de acompanhamento. Dez crianças com mordida cruzada posterior bilateral foram avaliadas (grupo experimental). Modelos de estudo e telerradiografias laterais foram avaliadas antes da ERM (T0), assim como três meses (T1), um ano (T2) e três anos (T3) após a ERM. As medidas foram comparadas às de um grupo controle composto de 21 pacientes por meio do teste ANOVA e teste t Student (p > 0,05). As mudanças no plano transversal revelaram uma expansão significante no arco superior três meses após a ERM, que se manteve estável após três anos. A expansão ao nível das cúspides foi similar à do nível gengival. Mas nenhuma diferença significante foi encontrada estre as medidas cefalométricas angulares e lineares ao longo dos períodos T0, T1, T2, e T3 e nem quando se comparou essas medidas às do grupo controle (p > 0,05). Conclui-se que A ERM precoce produz aumentos transversais estáveis no arco superior sem alterar significantemente as relações sagitais e verticais dentoesqueléticas e nem inclinar dentes.

Low-level laser therapy effects on pain perception related to the use of orthodontic elastomeric separators.

INTRODUCTION: Some patients refer to pre-banding orthodontic separation as a painful orthodontic procedure. Low-level laser therapy (LLLT) has been reported to have local analgesic effect. OBJECTIVE: The aim of this single-blind study was to investigate the perception of pain caused by orthodontic elastomeric separators with and without a single LLLT application (6J). METHODS: The sample comprised 79 individuals aged between 13 and 34 years old at orthodontic treatment onset. Elastomeric separators were placed in first maxillary molars at mesial and distal surfaces and kept in place for three days. The volunteers scored pain intensity on a visual analogue scale (VAS) after 6 and 12 hours, and after the first, second and third days. One third of patients received laser applications, whereas another third received placebo applications and the remaining ones were controls. Applications were performed in a split-mouth design. Thus, three groups (laser, placebo and control) were assessed. RESULTS: No differences were found among groups considering pain perception in all periods observed. CONCLUSION: The use of a single-dose of LLLT did not cause significant reduction in orthodontic pain perception. Overall pain perception due to orthodontic separator placement varied widely and was usually mild.